The following commands are run in operational mode, or use run show in configuration mode.

Show current firewall session count

show security flow session | match 10.22.12.104
show security flow session source-prefix 10.22.12.104

Clear current sessions

clear security flow session all

Query OID

show snmp mib walk decimal 1.3.6.1.2.1.2.2.1.2

Check current software version

show system software

Check system uptime

show system uptime

Check hardware cards and serial numbers

show chassis haredware

Check current hardware status

show chassis environment

Show routing table

show route

Vendor default values for administrative distance / route preference

Show ARP table

show arp

Show system log

show log messages

Show all interface statuses

show interface terse

Show interface detail

show interface ge-x/y/z detail

Monitor interface packet forwarding stats

monitor interface ge-x/y/z

Check ALG status

show security alg status

LOG

file list /cf/var/log | match cpu_date_0

BGP black hole setup

Basic setup Factory reset

root@srx#start shell
root@srx%
root@srx%cli
root@srx#
root@srx#load factory-default
warning: activing factory configuration *恢復原廠設定後，需立即設置 ROOT 帳密
root@srx# set system root-authentication plain-text-password
root@srx#commit

Remote management credentials

root@srx#set system login user username class super-user authentication plain-text-password

set system login user support029 uid 2029
set system login user support029 class ADMIN
set system login user support029 encrypted-password "$5$JQoeH.gs$f6/3srHsGRvvEXZ5Ok/Hpj/uc1CG.sPQZfXMoCXaWk8"
# Account is username with super-user privileges
# Set session timeout to 5 minutes

set system login idle-timeout 5

Allow login from specific IP

set policy-options prefix-list manager-ip 8.8.8.8/32

Set system time

root@srx#run set date 201711011329.14
root@srx#set system ntp server 168.95.1.1

Set hostname

root@srx#set system host-name QQ
root@QQ#

Set domain name

root@srx#set system domain-name abc.cde

Set DNS

root@srx#set system name-server 8.8.8.8

Enable SSH remote management

root@srx#set system service ssh

Enable HTTPS remote management

root@srx#set system service web-management https

Add annotation

root@srx#annotate

######Add these two policy log session lines ### to view log debug issues

set security policies from-zone DB to-zone INTERNET policy For_Postgres then log session-init
set security policies from-zone DB to-zone INTERNET policy For_Postgres then log session-close
show log traffic-log